The Triumphant? Return

After a long time away the glorious trustbucket is back on the road looking sleeker and sexier then before!
Side note for those unaware "trustbucket" is a combination of triumph and rustbucket.

start them young

very little progress...

very little progress has been made towards the next attempt at salty greatness. mostly this is due to a complete unwillingness to pay for materials but also because i keep busting knuckles and catching fire at work. things like that put a bit of a damper on my enthusiasm to wrench on my own time; and my dog bit me on the ass today. in spite of that the west campus of coconut customs is slowly trudging along. the new gas tank is starting to take form, just need to make the proper bungs and think out a few other bits. 

 the frame has also been added on to. this is the forward mount for the additional 87 pounds of steel added to help keep traction on the salt. on a side note; 3 phase welding machines are quite erotic. something about blasting through 3/4" plate just gets me all bothered.

 and a little dangling...

little nostalgic lately

yo dylan, remember this? first trip out to the salt with andy? remember that time you vanished on his Dahk Kustum? 

dylan getting some in moab, we totally need to get back there

one of my favorite campsites: Ouray, CO in their outdoor hockey rink. 

 the Tetons in WY. there were no motorcycles involved but there were a few bears.

 my old haus on peak 7 in Colorado. this sparked a debate between my roomie and i about what smelled worse: burnt fork oil or his hockey gear.

new toys finally working

this post is kinda lame and considering how busy we've all been lately and the resulting lack of posts, it is no wonder no one is reading this thing. anyways, todays lesson is that with a bit of persistence a motivated person can force the square peg into the round hole. case in point: my gear welding 3/4" mild steel. according to the welding rep i deal with at work, my torch set up is almost twice my age with tips that are well beyond beat. and i have finally reached a point where my welding machine cannot keep up with my projects. either way, with a little time, a bunch of pre-heating, the wire feed all the way down, electricity at 11 and right off the breaker; 3/4" became one with 1/4". yay. 

belated happy new years

leaving work on friday was better than usual, the dudes i work with and the general job description can hammer on people like no other. 

 i made her my bitch...

 and on to the Boiling River in Yellowstone. almost 3 hours of soaking does a body good

 and fireworks and booze ensued.

happy new years.

new rule...

there is a new rule for the shop, both at home and work: the toilet will no longer be used to quench metal, the smell can be disturbing.

Needed...

I am in need of a Sportster fuel tank; it has just the right shape for something i want to try on the Salt Bike. if you would like to donate one to the cause or are will to sell it cheap send an email to whathappenedtotheduck@yahoo.com. it doesn't have to look good or even hold fuel, rust is not a problem. it just cannot have any huge dents in it.

the weight is a sign of reliability...

sometimes working for a drilling company comes in handy, especially when you need to make things heavier. my employer bases much of the machine design in the notion: if the part can be made well out of 1/4" steel, it will be indestructible made from 1 1/2". this line of thought inevitably produces plenty of waste both figuratively and physically for me to pick through and salvage. lord knows that my current budget does not allow for the purchase of 100lbs. worth of steel just to be strapped to the underside of a seldom-used motorcycle. so with a bit of patience i have gotten almost all of the components together to make something happen; a year ago at a swap i swindled a dude out of a torch outfit and a handy book all about gas-welding, months ago i salvaged some oxy-acetylene tanks out of a dumpster and now i have the raw materials in hand. all that is needed is some gas and rod and a little instruction. and it just so happens that i have a local pal, experienced in the gas-welding process, who will instruct me in an exchange for a face-crushing burrito.

what did you do today?

the snow is here, F motorcycles for awhile

this is probably a bad idea...

this post may be one of the worst ideas i've had in awhile. these are pictures of the Salt Bike's engine mods for our last trip to the salt. to put up what i've got in my engine is kind of a racing fuax pas because now anyone can try and copy them or whatever. but realistically, without the measurements, anyone who tries this without knowing what they're doing will just end up uncorking their motor so have at it. one picture that i lost or may have already posted was that of the piston's mods. the piston was windowed to match up with the expansion of the intake ports. a way long time ago i mentioned that the intake never really closes and these are what make that happen. the only thing between my race motor and a 20 pound paper weight are the reed valves. and those are pushed pretty far too. the cage of another make and model were modified to be sharper and wider and accept i wider petal. this is where Chris Carter came in. he made us a few sets of different weight reeds just for this engine, sweet deal. all this nonsense resulted in 36hp at the rear wheel while running 2:1 final drive. i have yet to figure out how that translates to what the Factory lists as the stock HP, mainly cause i can't find what they listed so who cares what the comparison is. 

anyways, there is zero moneys in the bank but i've been trash picking for materials. 

FUCT

Allow me to explain how bad this actually sucks(because yes, it's actually worse than it appears). After years of riding on borrowed time, my top end finally gave up the ghost about a month ago. My rear exhaust valve just gave up and tried to become one with my piston and my piston rejected the valves love and ran away into my lower end. Where this gets even better is that my motor is a 1972 with shitty thin walled cylinders from the factory and a unique head bolt pattern meaning I now need 2 new cylinders and heads.

Fast forward to now, and the cases are completely empty and there are 2 standard bore cylinders and pistons on my bench with heads to match. Still on the horizon are new andrews cams and a freshly balanced rotating assembly.

i need this, right?

i don't know what the numbers mean but someone smarter says this is faster.
sure, whatever, just do what i tell ya. HANDBANANA, NO!!!!!

shifting gears... again

it snowed, ready the fleet! only 5 of those are mine, i swear. 

 the grand tetons....               scariest mountains i have ever seen.

shifted gears...

no pun intended. but the shop has shifted gears back to a long-lost love. rallying around with an obnoxious, smoke-belching turd under your ass is one of the greatest things ever. but rocketing through trees or blasting through red lights is better, sorry, its a fact. if you don't know, try to figure it out.
so posting has slowed but progress is happening. send emails to dylan and jeff and kenny to put up what they have going on, its really some cool stuff.